Earthmaster C Especificaciones, Precio y Review (2026)
AgrÃcola · Ideal para granjas pequeñas y versatilidad
Combustible
Diesel
Transmisión
Manual
TDF
540 rpm
Peso
937 kg (1 t)
Precio nuevo (aprox.)
$10,000 – $15,000
Precio ocasión (aprox.)
$3,500 – $10,500
Descripción general
Con de potencia, el Earthmaster C es un tractor agrÃcola orientado a explotaciones pequeñas, paisajismo y trabajo ligero con pala. Fabricado por Earthmaster, el C cumple los estándares de ingenierÃa esperados de este fabricante. Aquà encontrarás todos los datos técnicos del C: motor, transmisión, TDF, sistema hidráulico, capacidad de elevación, peso y dimensiones del tractor. Nuestra sección de review del C detalla los puntos fuertes, contrapartidas y casos de uso reales basados en las especificaciones técnicas. ¿Buscas el precio del C? Nuestra sección de mercado de ocasión estima los valores de reventa actuales y el panel de anuncios enlaza con datos de mercado en tiempo real. Desplázate hacia abajo para ver todas las tablas de especificaciones del Earthmaster C, puntuaciones de adecuación, estimaciones de precio y enlaces a tractores similares.
Análisis TractorFit™
Puntuación global
Según especificaciones y adecuación al uso de Earthmaster C.
Con sus especificaciones, el segmento utilitario medio capaz de trabajo con pala, siega y agricultura en superficies medianas. Una caja manual ofrece operación directa y menor complejidad. Casos de uso: labranza, siembra, forraje y manejo de materiales. Datos clave: 1 t de peso en orden de trabajo y rango de ocasión estimado $3,500–$10,500.
Mayor = más sencillo
Ventajas
- ✓Simple maintenance; mechanical transmission with lower repair costs.
- ✓Strong value for money relative to power and features.
- ✓Adequate power for light duties and use in tight spaces.
- ✓Reliable manual transmission with low maintenance cost.
Inconvenientes
- •Limited capacity for intensive loader work.
- •Modest power-to-weight ratio; less agility in traction and on slopes.
- •Basic hydraulic system; limited for demanding implements.
Earthmaster C receives an overall suitability score of NaN/100 from the TractorSuitabilityâ„¢ Engine. tight spaces and transport on smaller trailers. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. Loader work rates 12/100; fuel efficiency index is NaN/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Premium: Premium segment with higher fuel and maintenance expectations; plan for elevated operating costs. Versatility (50/100) reflects PTO and hydraulic options; cost tier (85/100) reflects value for money. It stands out in: value. It has relative limitations in: loader. Overall, it offers a specialized profile for its class. The TractorSuitabilityâ„¢ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.
Rendimiento y uso real
Destacados
- La transmisión manual simplifica el diseño y reduce costes de propiedad.
- Peso en orden de trabajo de unas 1 t favorece maniobrabilidad y transporte.
- Rango de precio de ocasión estimado: $3,500–$10,500 USD.
- Orientación agrÃcola: trabajo de campo, TDF y fiabilidad.
Contrapartidas
- La complejidad de mantenimiento se valora por encima de la media; tenga en cuenta acceso al servicio y disponibilidad de piezas.
- La adecuación para pala y accesorios delanteros está limitada por diseño; mejor para tareas ligeras con pala.
Ideal para
- Forraje en superficies pequeñas y medianas
- Pala y nivelación
- Uso mixto agrÃcola y finca
No ideal para
- Trabajo intensivo y continuo con pala
- Compradores que priorizan bajo mantenimiento
- Grandes superficies de cultivo o labranza pesada
Earthmaster C — Ventajas y desventajas
Ventajas
- La transmisión manual simplifica el diseño y reduce costes de propiedad.
- Peso en orden de trabajo de unas 1 t favorece maniobrabilidad y transporte.
- Rango de precio de ocasión estimado: $3,500–$10,500 USD.
- Orientación agrÃcola: trabajo de campo, TDF y fiabilidad.
Desventajas
- La complejidad de mantenimiento se valora por encima de la media; tenga en cuenta acceso al servicio y disponibilidad de piezas.
- La adecuación para pala y accesorios delanteros está limitada por diseño; mejor para tareas ligeras con pala.
Mercado de ocasión
Precio de ocasión estimado
$3,500 – $10,500 USD
Alta confianza
Solo estimación. Los precios reales varÃan según estado, horas y región.
Lista para compradores
- Compruebe horas de motor y TDF; el historial de mantenimiento importa para la fiabilidad.
- Confirme que la velocidad del TDF (540/1000) y la potencia coinciden con segadoras, empacadoras u otros implementos.
- Revise hidráulica y enganche de tres puntos; las reparaciones pueden ser caras.
En un Earthmaster C de ocasión, importan las horas y el historial de mantenimiento. Comprueba TDF e hidráulica, estado de neumáticos y que los implementos coincidan con tu potencia y categorÃa.
Find Used Listings (International)
Find Earthmaster Dealers Near You
Authorized dealerships selling and servicing Earthmaster tractors.
Especificaciones técnicas
What this means: Engine specs define power for PTO work, drawbar load, and fuel use. Higher displacement often means more torque at lower rpm.
No engine data available.
Comparar con modelos similares
Preguntas frecuentes
What type of transmission does the Earthmaster C have?
The Earthmaster C uses a manual transmission.
What should I check when buying a used Earthmaster C?
Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.
What fuel does the Earthmaster C use?
The Earthmaster C uses diesel fuel.
What is the weight of the Earthmaster C?
Operating weight is approximately 937 kg (1 tons).
Where can I find used Earthmaster C listings?
This page links to international marketplaces where you can search for used Earthmaster C tractors; listings are provided by third parties.
How much does a used Earthmaster C cost?
Used Earthmaster C tractors are often listed in the range of $3,500–$10,500 USD (high confidence). Actual prices depend on hours, condition, and region.
Does the Earthmaster C have a PTO?
PTO specs are not listed; verify rear and front PTO availability and speed before matching implements.
Earthmaster C: Complete Tractor Specifications and Technical Data
Overview
The Earthmaster C is a agricultural tractor from Earthmaster designed for agricultural operations. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This agricultural tractor features a diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the Earthmaster C, making it easy to compare with other models in the Earthmaster lineup or across different brands.
Transmission Specifications
The Earthmaster C features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.
Dimensions and Weight
Understanding tractor dimensions and weight is essential for storage, transport, and operational compatibility. The Earthmaster C's specifications help determine if the tractor fits your operational requirements.
- Wheelbase: 1676 mm (66.0 in)
- Weight: 937 kg (2066 lbs)
Power Take-Off (PTO)
The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.
- PTO Speed: 540 rpm
Performance and Applications
The Earthmaster C delivers reliable performance for agricultural applications including plowing, planting, and harvesting. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the Earthmaster C matches your operational demands.
Technical Data Summary
This guide provides complete technical data and detailed specifications for the Earthmaster C. Key specifications include: manual transmission, and 937 kg weight. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.
Conclusion
The Earthmaster C is a reliable agricultural tractor from Earthmaster, designed for modern farming operations. With its diesel engine and manual transmission, weighing 1 tons, it provides dependable performance for agricultural tasks. This comprehensive guide offers all essential Earthmaster C tractor data and specifications for informed decision-making.
Conclusión
El Earthmaster C es una opción a considerar con precaución para operadores que necesitan Forraje en superficies pequeñas y medianas, Pala y nivelación, Uso mixto agrÃcola y finca. Consulta el rango de precios indicado en la parte superior y compara con modelos similares para asegurarte de que se ajusta a tu presupuesto. Usa nuestra herramienta de comparación para evaluar el C frente a otros tractores en la misma gama de potencia antes de tomar una decisión.