John Deere 3540 Especificaciones, Precio y Review (2026)
AgrÃcola · Ideal para granjas pequeñas y versatilidad
Combustible
Diesel
Transmisión
Manual
TDF
540 rpm
Precio nuevo (aprox.)
$10,000 – $15,000
Precio ocasión (aprox.)
$3,500 – $10,500
Descripción general
Con de potencia, el John Deere 3540 es un tractor agrÃcola orientado a explotaciones pequeñas, paisajismo y trabajo ligero con pala. Fabricado por John Deere, el 3540 cumple los estándares de ingenierÃa esperados de este fabricante. Aquà encontrarás todos los datos técnicos del 3540: motor, transmisión, TDF, sistema hidráulico, capacidad de elevación, peso y dimensiones del tractor. Nuestra sección de review del 3540 detalla los puntos fuertes, contrapartidas y casos de uso reales basados en las especificaciones técnicas. ¿Buscas el precio del 3540? Nuestra sección de mercado de ocasión estima los valores de reventa actuales y el panel de anuncios enlaza con datos de mercado en tiempo real. Desplázate hacia abajo para ver todas las tablas de especificaciones del John Deere 3540, puntuaciones de adecuación, estimaciones de precio y enlaces a tractores similares.
Análisis TractorFit™
Puntuación global
Según especificaciones y adecuación al uso de John Deere 3540.
Con sus especificaciones, el banda 25–60 CV adecuada para uso mixto: forraje, nivelación y tareas de finca. La transmisión manual es una opción probada para quien prefiere selección directa de marchas. Como tractor agrÃcola, está pensado para trabajo de campo, implementos a TDF y fiabilidad diaria. Datos clave: rango de ocasión estimado $3,500–$10,500.
Mayor = más sencillo
Ventajas
- ✓Simple maintenance; mechanical transmission with lower repair costs.
- ✓Strong value for money relative to power and features.
- ✓Adequate power for light duties and use in tight spaces.
- ✓Reliable manual transmission with low maintenance cost.
Inconvenientes
- •Limited capacity for intensive loader work.
- •Modest power-to-weight ratio; less agility in traction and on slopes.
- •Basic hydraulic system; limited for demanding implements.
John Deere 3540 receives an overall suitability score of NaN/100 from the TractorSuitabilityâ„¢ Engine. General-purpose tractor suited to 0 HP class; match to your acreage and primary tasks using TractorSuitabilityâ„¢ scores. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. Loader work rates 15/100; fuel efficiency index is NaN/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Premium: Premium segment with higher fuel and maintenance expectations; plan for elevated operating costs. Versatility (50/100) reflects PTO and hydraulic options; cost tier (85/100) reflects value for money. It stands out in: value. It has relative limitations in: loader. Overall, it offers a specialized profile for its class. The TractorSuitabilityâ„¢ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.
Rendimiento y uso real
Destacados
- La transmisión manual simplifica el diseño y reduce costes de propiedad.
- Rango de precio de ocasión estimado: $3,500–$10,500 USD.
- Orientación agrÃcola: trabajo de campo, TDF y fiabilidad.
Contrapartidas
- No se indica el peso; confirme el peso real para transporte, estabilidad y lastrado.
- La puntuación de adecuación sugiere demandas de mantenimiento por encima de la media; valore historial y soporte local.
- La adecuación para pala es moderada; compruebe capacidad del eje delantero y compatibilidad para trabajo pesado.
Ideal para
- Forraje en superficies pequeñas y medianas
- Pala y nivelación
- Uso mixto agrÃcola y finca
No ideal para
- Trabajo intensivo y continuo con pala
- Compradores que priorizan bajo mantenimiento
- Grandes superficies de cultivo o labranza pesada
John Deere 3540 — Ventajas y desventajas
Ventajas
- La transmisión manual simplifica el diseño y reduce costes de propiedad.
- Rango de precio de ocasión estimado: $3,500–$10,500 USD.
- Orientación agrÃcola: trabajo de campo, TDF y fiabilidad.
Desventajas
- No se indica el peso; confirme el peso real para transporte, estabilidad y lastrado.
- La puntuación de adecuación sugiere demandas de mantenimiento por encima de la media; valore historial y soporte local.
- La adecuación para pala es moderada; compruebe capacidad del eje delantero y compatibilidad para trabajo pesado.
Mercado de ocasión
Precio de ocasión estimado
$3,500 – $10,500 USD
Alta confianza
Solo estimación. Los precios reales varÃan según estado, horas y región.
Lista para compradores
- Compruebe horas de motor y TDF; el historial de mantenimiento importa para la fiabilidad.
- Confirme que la velocidad del TDF (540/1000) y la potencia coinciden con segadoras, empacadoras u otros implementos.
- Revise hidráulica y enganche de tres puntos; las reparaciones pueden ser caras.
En un John Deere 3540 de ocasión, importan las horas y el historial de mantenimiento. Comprueba TDF e hidráulica, estado de neumáticos y que los implementos coincidan con tu potencia y categorÃa.
Find Used Listings (International)
Find John Deere Dealers Near You
Authorized dealerships selling and servicing John Deere tractors.
Especificaciones técnicas
What this means: Cylinder count and displacement affect smoothness and repair complexity; compare to similar models in the same HP band.
No engine data available.
Documentation & Resources
Comparar con modelos similares
Preguntas frecuentes
Is the John Deere 3540 good for loader work?
TractorFit scores rate this model as less suited for loader work (15/100). Check front axle capacity and loader compatibility for your intended use.
What is the John Deere 3540 best used for?
As a farm tractor, the John Deere 3540 is suited to fieldwork, PTO-driven implements, hay work, and general estate or small-farm tasks.
What type of transmission does the John Deere 3540 have?
The John Deere 3540 uses a manual transmission.
What should I check when buying a used John Deere 3540?
Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.
What fuel does the John Deere 3540 use?
The John Deere 3540 uses diesel fuel.
What is the weight of the John Deere 3540?
Published weight is not available; confirm with the seller or manufacturer for transport and ballasting.
Where can I find used John Deere 3540 listings?
This page links to international marketplaces where you can search for used John Deere 3540 tractors; listings are provided by third parties.
How much does a used John Deere 3540 cost?
Used John Deere 3540 tractors are often listed in the range of $3,500–$10,500 USD (high confidence). Actual prices depend on hours, condition, and region.
John Deere 3540: Complete Tractor Specifications and Technical Data
Overview
The John Deere 3540 is a agricultural tractor from John Deere designed for agricultural operations. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This agricultural tractor features a diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the John Deere 3540, making it easy to compare with other models in the John Deere lineup or across different brands.
Transmission Specifications
The John Deere 3540 features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.
Power Take-Off (PTO)
The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.
- PTO Speed: 540 rpm
Performance and Applications
The John Deere 3540 delivers reliable performance for agricultural applications including plowing, planting, and harvesting. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the John Deere 3540 matches your operational demands.
Technical Data Summary
This guide provides complete technical data and detailed specifications for the John Deere 3540. Key specifications include: manual transmission. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.
Conclusion
The John Deere 3540 is a reliable agricultural tractor from John Deere, designed for modern farming operations. With its diesel engine and manual transmission, it provides dependable performance for agricultural tasks. This comprehensive guide offers all essential John Deere 3540 tractor data and specifications for informed decision-making.
Conclusión
El John Deere 3540 es una opción a considerar con precaución para operadores que necesitan Forraje en superficies pequeñas y medianas, Pala y nivelación, Uso mixto agrÃcola y finca. Consulta el rango de precios indicado en la parte superior y compara con modelos similares para asegurarte de que se ajusta a tu presupuesto. Usa nuestra herramienta de comparación para evaluar el 3540 frente a otros tractores en la misma gama de potencia antes de tomar una decisión.