Oliver OC-3 Specs, Price and Review (2026)
Industrial · 329.4 HP · Best for fuel efficiency and versatility
Power
329.4 HP (246 kW)
Fuel
Diesel
Transmission
Manual
PTO
280 HP @ 540 rpm
Weight
1,751 kg (2 t)
New price (est.)
$272,743 – $409,115
Est. used price
$95,460 – $286,381
Overview
The Oliver OC-3 is a 329.4 HP industrial utility tractor built for loader work, backhoe use, and site operations. The Oliver tractor lineup is known for durability, and the OC-3 is no exception. This page provides detailed Oliver OC-3 specifications — engine, transmission, PTO, hydraulics, weight, and dimensions — sourced from manufacturer technical data. Whether you need a OC-3 review for a purchase decision or a trade-in comparison, this page covers performance analysis and suitability scoring. For Oliver OC-3 price guidance, we provide new price estimates and used market ranges so you can budget accurately before contacting a dealer. Compare the Oliver OC-3 with similar tractors using the links below, or use our TractorFit™ analysis to see how it scores for your specific operation.
TractorFit™ Analysis
Overall score
Based on specs and use-case fit for Oliver OC-3.
This model sits in the top power band for large farms and contractors who need maximum drawbar and PTO output. Manual transmission keeps ownership costs down and is well understood for maintenance. Industrial tractors are often used for construction, landscaping, and material handling. PTO specs determine compatibility with mowers, balers, and other powered attachments. Key specs include 329.4 HP, 280 HP PTO, 2 t operating weight, estimated used range $95,460–$286,381, and overall suitability 65/100.
Higher = simpler
Pros
- ✓Efficient consumption relative to power-to-weight and engine type.
- ✓Simple maintenance; mechanical transmission with lower repair costs.
- ✓High versatility: PTO and hydraulic options for multiple implements.
- ✓Strong power-to-weight ratio for drawbar work and acceleration.
- ✓Reliable manual transmission with low maintenance cost.
Cons
- •May be excessive in size and fuel use for very small farms.
- •Limited capacity for intensive loader work.
- •Premium price segment relative to power and specification level.
- •Basic hydraulic system; limited for demanding implements.
Oliver OC-3 receives an overall suitability score of 65/100 from the TractorSuitability™ Engine. mixed use with multiple PTO and hydraulic implements, operations where fuel economy is a priority, demanding loader and draft work on larger operations. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. Loader work rates 17/100; fuel efficiency index is 100/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Low: Good fuel efficiency, strong value tier, and low maintenance complexity keep operating costs down. Versatility (71/100) reflects PTO and hydraulic options; cost tier (38/100) reflects value for money. It has relative limitations in: small farm, loader. Overall, it offers a balanced profile for its class. The TractorSuitability™ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.
Real-world performance & ownership
Highlights
- Top-tier power for maximum productivity and large implements.
- Manual transmission keeps design simple and ownership costs lower.
- Operating weight around 2 t aids maneuverability and transport.
- Rated PTO output of 280 HP supports mowers, hay tools, and other driven implements.
- Suitability profile is solid across typical use cases.
- Fuel efficiency scores well for its power class.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $95,460–$286,381 USD.
Trade-offs
- Maintenance complexity is rated on the higher side; factor in service access and parts availability.
- Loader and front attachment suitability is limited by design; best for lighter loader duties.
Best for
- Maximum productivity fieldwork
- Large balers and tillage
- Big-acreage and contractor use
- Fuel-conscious operation
- Mixed tasks and attachment use
Not ideal for
- Heavy, continuous loader work
- Low-maintenance-first buyers
- Light-duty or compact-property-only use
Oliver OC-3 — Pros and Cons
Pros
- Top-tier power for maximum productivity and large implements.
- Manual transmission keeps design simple and ownership costs lower.
- Operating weight around 2 t aids maneuverability and transport.
- Rated PTO output of 280 HP supports mowers, hay tools, and other driven implements.
- Suitability profile is solid across typical use cases.
- Fuel efficiency scores well for its power class.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $95,460–$286,381 USD.
Cons
- Maintenance complexity is rated on the higher side; factor in service access and parts availability.
- Loader and front attachment suitability is limited by design; best for lighter loader duties.
Used market insights
Estimated used price
$95,460 – $286,381 USD
High confidence
Estimate only. Actual prices vary by condition, hours, and region.
Buyer checklist
- Check engine and PTO hours; service history matters for long-term reliability.
- Confirm PTO speed (540/1000) and HP match your mowers, balers, or other implements.
- Inspect hydraulics and three-point hitch condition; repair costs can be high.
For used Oliver OC-3, verify hours, hydraulic condition, and loader/backhoe compatibility. Confirm weight for transport and permits.
Find Used Listings (International)
Find Oliver Dealers Near You
Authorized dealerships selling and servicing Oliver tractors.
Oliver OC-3 Videos
Community Discussions
Technical Specifications
What this means: Power and cooling capacity matter for loader and backhoe work; diesel is typical for industrial tractors.
Engine
- Maximum Power (Gross)
- 329.4 HP (246 kW)
- Fuel Type
- Diesel
- Cooling
- Liquid
Compare with similar models
Better Alternatives
Frequently asked questions
Does the Oliver OC-3 have a PTO?
Yes. The Oliver OC-3 has a rear PTO rated at 280 HP at 540 rpm.
What is the horsepower of the Oliver OC-3?
The Oliver OC-3 is rated at 329.4 HP (gross) (246 kW).
Is the Oliver OC-3 good for loader work?
TractorFit scores rate this model as less suited for loader work (17/100). Check front axle capacity and loader compatibility for your intended use.
What is the Oliver OC-3 best used for?
The Oliver OC-3 is aimed at industrial or utility use such as loaders and site work.
What type of transmission does the Oliver OC-3 have?
The Oliver OC-3 uses a manual transmission.
What should I check when buying a used Oliver OC-3?
Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.
What fuel does the Oliver OC-3 use?
The Oliver OC-3 uses diesel fuel.
What is the weight of the Oliver OC-3?
Operating weight is approximately 1,751 kg (2 tons).
Where can I find used Oliver OC-3 listings?
This page links to international marketplaces where you can search for used Oliver OC-3 tractors; listings are provided by third parties.
Oliver OC-3: Complete Tractor Specifications and Technical Data
Overview
The Oliver OC-3 is a industrial tractor from Oliver designed for landscaping and property maintenance. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This industrial tractor features a 329.4 HP diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the Oliver OC-3, making it easy to compare with other models in the Oliver lineup or across different brands.
Engine Specifications
The Oliver OC-3 is powered by a diesel engine that delivers 329.4 HP for property maintenance. Tractor horsepower is a critical specification that determines the machine's ability to handle various implements. The engine specifications demonstrate Oliver's engineering expertise in creating efficient powerplants.
- Maximum Power: 329.4 HP (246 kW)
- Fuel Type: Diesel
- Cooling System: Liquid-cooled
Transmission Specifications
The Oliver OC-3 features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.
Dimensions and Weight
Understanding tractor dimensions and weight is essential for storage, transport, and operational compatibility. The Oliver OC-3's specifications help determine if the tractor fits your operational requirements.
- Weight: 1751 kg (3860 lbs)
Power Take-Off (PTO)
The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.
- PTO Speed: 540 rpm
- PTO Power: 280 HP (209 kW)
Performance and Applications
The Oliver OC-3 delivers 329.4 HP performance for landscaping and property maintenance tasks. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the Oliver OC-3 matches your operational demands.
Technical Data Summary
This guide provides complete technical data and detailed specifications for the Oliver OC-3. Key specifications include: 329.4 HP engine, manual transmission, 280 HP PTO, and 1751 kg weight. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.
Conclusion
The Oliver OC-3 is a versatile lawn tractor from Oliver, designed for property maintenance. With its 329.4 HP diesel engine and manual transmission, weighing 2 tons, it provides efficient operation for landscaping work. This comprehensive guide offers all essential Oliver OC-3 tractor data and specifications for informed decision-making.
Conclusion
With 329.4 HP, the Oliver OC-3 is a solid choice for operators who need Maximum productivity fieldwork, Large balers and tillage, Big-acreage and contractor use. Check the price range shown above and compare with similar models to ensure it fits your budget. Use our comparison tool to stack the OC-3 against other tractors in the same HP range before making a final decision.