Deutz-Allis 7110 Specs, Price and Review (2026)
Agricultural · 110 HP · Best for versatility and fuel efficiency
Power
110 HP (82 kW)
Fuel
Diesel
Transmission
Manual
PTO
94 HP @ 540 rpm
Weight
4,840 kg (5 t)
New price (est.)
$63,360 – $95,040
Est. used price
$22,176 – $66,528
Overview
The Deutz-Allis 7110 sits in the 60–120 HP mid-range power class and is aimed at large-acreage farming, heavy tillage, and large-implement compatibility. Deutz-Allis tractors are widely used across farm operations, and the 7110 represents a strong entry in the 60–120 HP mid-range segment. On this page you will find complete Deutz-Allis 7110 specs including engine data, transmission type, hydraulic lift capacity, PTO output, dimensions, and operating weight. Use the Deutz-Allis 7110 review sections on this page — TractorFit analysis, pros and cons, and use-case ratings — to judge suitability before purchasing. Deutz-Allis 7110 price varies by year, hours, condition, and region — our used price estimate gives you a data-based range to start your search. Use this page to review all Deutz-Allis 7110 data in one place — from specs and pricing to suitability ratings and direct comparisons with competing models.
TractorFitâ„¢ Analysis
Overall score
Based on specs and use-case fit for Deutz-Allis 7110.
This model sits in the 60–120 HP range that fits full-time farming and large-property management. Manual transmission is a proven choice for operators who prefer direct gear selection. As a farm tractor, it is built for fieldwork, PTO-driven implements, and all-day reliability. Rear PTO capability allows use of mowers, tillers, and other PTO-driven equipment. Key specs include 110 HP, 94 HP PTO, 5 t operating weight, estimated used range $22,176–$66,528, and overall suitability 53/100.
Higher = simpler
Pros
- ✓Simple maintenance; mechanical transmission with lower repair costs.
- ✓High versatility: PTO and hydraulic options for multiple implements.
- ✓Reliable manual transmission with low maintenance cost.
Cons
- •Limited capacity for intensive loader work.
- •Modest power-to-weight ratio; less agility in traction and on slopes.
- •Basic hydraulic system; limited for demanding implements.
Deutz-Allis 7110 receives an overall suitability score of 53/100 from the TractorSuitabilityâ„¢ Engine. mixed use with multiple PTO and hydraulic implements. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. Loader work rates 31/100; fuel efficiency index is 68/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Moderate: Reasonable fuel efficiency and maintenance; operating costs are in line with the power class. Versatility (71/100) reflects PTO and hydraulic options; cost tier (59/100) reflects value for money. It has relative limitations in: large farm, loader. Overall, it offers a specialized profile for its class. The TractorSuitabilityâ„¢ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.
Real-world performance & ownership
Highlights
- Strong engine power for PTO work and heavy drawbar loads.
- Manual transmission keeps design simple and ownership costs lower.
- 5 t operating weight fits a broad range of implements and conditions.
- Rated PTO output of 94 HP supports mowers, hay tools, and other driven implements.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $22,176–$66,528 USD.
- Farm orientation targets fieldwork, PTO work, and reliability.
Trade-offs
- Maintenance complexity is rated on the higher side; factor in service access and parts availability.
- Loader and front attachment suitability is limited by design; best for lighter loader duties.
Best for
- Row-crop and hay operations
- Feeding and material handling
- Full-season fieldwork
- Mixed tasks and attachment use
Not ideal for
- Heavy, continuous loader work
- Low-maintenance-first buyers
Deutz-Allis 7110 — Pros and Cons
Pros
- Strong engine power for PTO work and heavy drawbar loads.
- Manual transmission keeps design simple and ownership costs lower.
- 5 t operating weight fits a broad range of implements and conditions.
- Rated PTO output of 94 HP supports mowers, hay tools, and other driven implements.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $22,176–$66,528 USD.
- Farm orientation targets fieldwork, PTO work, and reliability.
Cons
- Maintenance complexity is rated on the higher side; factor in service access and parts availability.
- Loader and front attachment suitability is limited by design; best for lighter loader duties.
Used market insights
Estimated used price
$22,176 – $66,528 USD
High confidence
Estimate only. Actual prices vary by condition, hours, and region.
Buyer checklist
- Check engine and PTO hours; service history matters for long-term reliability.
- Confirm PTO speed (540/1000) and HP match your mowers, balers, or other implements.
- Inspect hydraulics and three-point hitch condition; repair costs can be high.
For used Deutz-Allis 7110, hours and service history matter. Confirm PTO and hydraulic operation, tire condition, and that implements match your HP and category.
Find Used Listings (International)
Find Deutz-Allis Dealers Near You
Authorized dealerships selling and servicing Deutz-Allis tractors.
Technical Specifications
What this means: Gross HP and torque influence implement sizing; diesel is standard for farm use and longevity.
Engine
- Maximum Power (Gross)
- 110 HP (82 kW)
- Fuel Type
- Diesel
- Cooling
- Liquid
Compare with similar models
Better Alternatives
Frequently asked questions
Is the Deutz-Allis 7110 good for loader work?
TractorFit scores rate this model as less suited for loader work (31/100). Check front axle capacity and loader compatibility for your intended use.
What is the Deutz-Allis 7110 best used for?
As a farm tractor, the Deutz-Allis 7110 is suited to fieldwork, PTO-driven implements, hay work, and general estate or small-farm tasks.
What type of transmission does the Deutz-Allis 7110 have?
The Deutz-Allis 7110 uses a manual transmission.
What should I check when buying a used Deutz-Allis 7110?
Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.
What fuel does the Deutz-Allis 7110 use?
The Deutz-Allis 7110 uses diesel fuel.
What is the weight of the Deutz-Allis 7110?
Operating weight is approximately 4,840 kg (5 tons).
Where can I find used Deutz-Allis 7110 listings?
This page links to international marketplaces where you can search for used Deutz-Allis 7110 tractors; listings are provided by third parties.
How much does a used Deutz-Allis 7110 cost?
Used Deutz-Allis 7110 tractors are often listed in the range of $22,176–$66,528 USD (high confidence). Actual prices depend on hours, condition, and region.
Deutz-Allis 7110: Complete Tractor Specifications and Technical Data
Overview
The Deutz-Allis 7110 is a agricultural tractor from Deutz-Allis designed for agricultural operations. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This agricultural tractor features a 110 HP diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the Deutz-Allis 7110, making it easy to compare with other models in the Deutz-Allis lineup or across different brands.
Engine Specifications
The Deutz-Allis 7110 is powered by a diesel engine that delivers 110 HP for agricultural tasks. Tractor horsepower is a critical specification that determines the machine's ability to handle various implements. The engine specifications demonstrate Deutz-Allis's engineering expertise in creating efficient powerplants.
- Maximum Power: 110 HP (82 kW)
- Fuel Type: Diesel
- Cooling System: Liquid-cooled
Transmission Specifications
The Deutz-Allis 7110 features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.
Dimensions and Weight
Understanding tractor dimensions and weight is essential for storage, transport, and operational compatibility. The Deutz-Allis 7110's specifications help determine if the tractor fits your operational requirements.
- Wheelbase: 2703 mm (106.4 in)
- Weight: 4840 kg (10.670 lbs)
Power Take-Off (PTO)
The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.
- PTO Speed: 540 rpm
- PTO Power: 94 HP (70 kW)
Performance and Applications
The Deutz-Allis 7110 delivers 110 HP performance for agricultural applications including plowing, planting, and harvesting. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the Deutz-Allis 7110 matches your operational demands.
Technical Data Summary
This guide provides complete technical data and detailed specifications for the Deutz-Allis 7110. Key specifications include: 110 HP engine, manual transmission, 94 HP PTO, and 4840 kg weight. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.
Conclusion
The Deutz-Allis 7110 is a reliable agricultural tractor from Deutz-Allis, designed for modern farming operations. With its 110 HP diesel engine and manual transmission, weighing 5 tons, it provides dependable performance for agricultural tasks. This comprehensive guide offers all essential Deutz-Allis 7110 tractor data and specifications for informed decision-making.
Conclusion
With 110 HP, the Deutz-Allis 7110 is a model worth considering carefully for operators who need Row-crop and hay operations, Feeding and material handling, Full-season fieldwork. Check the price range shown above and compare with similar models to ensure it fits your budget. Use our comparison tool to stack the 7110 against other tractors in the same HP range before making a final decision.