John Deere 40R Specs, Price and Review (2026)
Agricultural · 33 HP · Best for small farms and fuel efficiency
Power
33 HP (25 kW)
Fuel
Diesel
Transmission
Manual
PTO
28 HP @ 540 rpm
Weight
1,140 kg (1 t)
New price (est.)
$24,710 – $37,066
Est. used price
$8,649 – $25,946
Overview
TractorFitâ„¢ Analysis
Overall score
Based on specs and use-case fit for John Deere 40R.
With its specs, the 25–60 HP band suited to mixed use: hay work, grading, and general estate tasks. Manual transmission is a proven choice for operators who prefer direct gear selection. As a farm tractor, it is built for fieldwork, PTO-driven implements, and all-day reliability. Rear PTO capability allows use of mowers, tillers, and other PTO-driven equipment. Key specs include 33 HP, 28 HP PTO, 1 t operating weight, estimated used range $8,649–$25,946, and overall suitability 56/100.
Higher = simpler
Pros
- ✓Well suited to small and mid-size farms for power and maneuverability.
- ✓Efficient consumption relative to power-to-weight and engine type.
- ✓Simple maintenance; mechanical transmission with lower repair costs.
- ✓High versatility: PTO and hydraulic options for multiple implements.
- ✓Strong value for money relative to power and features.
- ✓Reliable manual transmission with low maintenance cost.
Cons
- •Limited power for large-scale work or heavy equipment.
- •Limited capacity for intensive loader work.
- •Modest power-to-weight ratio; less agility in traction and on slopes.
- •Basic hydraulic system; limited for demanding implements.
John Deere 40R receives an overall suitability score of 56/100 from the TractorSuitability™ Engine. Ideal for small to mid-size farms (roughly 5–40 ha), light fieldwork, mowing, and properties where maneuverability matters, mixed use with multiple PTO and hydraulic implements, operations where fuel economy is a priority, tight spaces and transport on smaller trailers. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. With 33 HP and around 1 tons weight, it fits small and mid-size farms where maneuverability and running costs matter. Loader work rates 13/100; fuel efficiency index is 72/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Low: Good fuel efficiency, strong value tier, and low maintenance complexity keep operating costs down. Versatility (71/100) reflects PTO and hydraulic options; cost tier (88/100) reflects value for money. It stands out in: small farm, value. It has relative limitations in: large farm, loader. Overall, it offers a balanced profile for its class. The TractorSuitability™ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.
Real-world performance & ownership
Highlights
- Engine size balances capability with operating cost.
- Manual transmission keeps design simple and ownership costs lower.
- Operating weight around 1 t aids maneuverability and transport.
- Rated PTO output of 28 HP supports mowers, hay tools, and other driven implements.
- Suitability profile is solid across typical use cases.
- Fuel efficiency scores well for its power class.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $8,649–$25,946 USD.
Trade-offs
- Suitability scoring suggests above-average maintenance demands; consider repair history and local support.
- Loader suitability scores modestly; check front axle capacity and loader compatibility for heavy material work.
Best for
- Small to mid-size hay work
- Loader and grading
- Mixed farming and estate use
- Fuel-conscious operation
- Mixed tasks and attachment use
Not ideal for
- Heavy, continuous loader work
- Low-maintenance-first buyers
- Large-acreage row-crop or heavy tillage
John Deere 40R — Pros and Cons
Pros
- Engine size balances capability with operating cost.
- Manual transmission keeps design simple and ownership costs lower.
- Operating weight around 1 t aids maneuverability and transport.
- Rated PTO output of 28 HP supports mowers, hay tools, and other driven implements.
- Suitability profile is solid across typical use cases.
- Fuel efficiency scores well for its power class.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $8,649–$25,946 USD.
Cons
- Suitability scoring suggests above-average maintenance demands; consider repair history and local support.
- Loader suitability scores modestly; check front axle capacity and loader compatibility for heavy material work.
Used market insights
Estimated used price
$8,649 – $25,946 USD
High confidence
Estimate only. Actual prices vary by condition, hours, and region.
Buyer checklist
- Check engine and PTO hours; service history matters for long-term reliability.
- Confirm PTO speed (540/1000) and HP match your mowers, balers, or other implements.
- Inspect hydraulics and three-point hitch condition; repair costs can be high.
For used John Deere 40R, hours and service history matter. Confirm PTO and hydraulic operation, tire condition, and that implements match your HP and category.
Find Used Listings (International)
Technical Specifications
What this means: Gross HP and torque influence implement sizing; diesel is standard for farm use and longevity.
Engine
- Maximum Power (Gross)
- 33 HP (25 kW)
- Fuel Type
- Diesel
- Cooling
- Liquid
Documentation & Resources
Compare with similar models
Better Alternatives
Frequently asked questions
Is the John Deere 40R good for loader work?
TractorFit scores rate this model as less suited for loader work (13/100). Check front axle capacity and loader compatibility for your intended use.
What is the John Deere 40R best used for?
As a farm tractor, the John Deere 40R is suited to fieldwork, PTO-driven implements, hay work, and general estate or small-farm tasks.
What type of transmission does the John Deere 40R have?
The John Deere 40R uses a manual transmission.
What should I check when buying a used John Deere 40R?
Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.
What fuel does the John Deere 40R use?
The John Deere 40R uses diesel fuel.
What is the weight of the John Deere 40R?
Operating weight is approximately 1,140 kg (1 tons).
Where can I find used John Deere 40R listings?
This page links to international marketplaces where you can search for used John Deere 40R tractors; listings are provided by third parties.
How much does a used John Deere 40R cost?
Used John Deere 40R tractors are often listed in the range of $8,649–$25,946 USD (high confidence). Actual prices depend on hours, condition, and region.
John Deere 40R: Complete Tractor Specifications and Technical Data
Overview
The John Deere 40R is a agricultural tractor from John Deere designed for agricultural operations. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This agricultural tractor features a 33 HP diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the John Deere 40R, making it easy to compare with other models in the John Deere lineup or across different brands.
Engine Specifications
The John Deere 40R is powered by a diesel engine that delivers 33 HP for agricultural tasks. Tractor horsepower is a critical specification that determines the machine's ability to handle various implements. The engine specifications demonstrate John Deere's engineering expertise in creating efficient powerplants.
- Maximum Power: 33 HP (25 kW)
- Fuel Type: Diesel
- Cooling System: Liquid-cooled
Transmission Specifications
The John Deere 40R features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.
Dimensions and Weight
Understanding tractor dimensions and weight is essential for storage, transport, and operational compatibility. The John Deere 40R's specifications help determine if the tractor fits your operational requirements.
- Weight: 1140 kg (2513 lbs)
Power Take-Off (PTO)
The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.
- PTO Speed: 540 rpm
- PTO Power: 28 HP (21 kW)
Performance and Applications
The John Deere 40R delivers 33 HP performance for agricultural applications including plowing, planting, and harvesting. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the John Deere 40R matches your operational demands.
Technical Data Summary
This guide provides complete technical data and detailed specifications for the John Deere 40R. Key specifications include: 33 HP engine, manual transmission, 28 HP PTO, and 1140 kg weight. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.
Conclusion
The John Deere 40R is a reliable agricultural tractor from John Deere, designed for modern farming operations. With its 33 HP diesel engine and manual transmission, weighing 1 tons, it provides dependable performance for agricultural tasks. This comprehensive guide offers all essential John Deere 40R tractor data and specifications for informed decision-making.
Conclusion
With 33 HP, the John Deere 40R is a solid choice for operators who need Small to mid-size hay work, Loader and grading, Mixed farming and estate use. Check the price range shown above and compare with similar models to ensure it fits your budget. Use our comparison tool to stack the 40R against other tractors in the same HP range before making a final decision.