Photo by Photographs by Radosław Drożdżewski (User:Zwiadowca21), CC BY-SA 4.0, via Wikimedia Commons
John Deere 4040 Specs, Price and Review (2026)
Agricultural · 180 HP · Best for fuel efficiency and versatility
Power
180 HP (134 kW)
Fuel
Diesel
Transmission
Manual
PTO
153 HP @ 540 rpm
New price (est.)
$103,680 – $155,520
Est. used price
$36,288 – $108,864
Overview
TractorFitâ„¢ Analysis
Overall score
Based on specs and use-case fit for John Deere 4040.
Positioned in the 120–180 HP band suited to heavy tillage, large hay operations, and high-capacity work. Manual transmission is a proven choice for operators who prefer direct gear selection. As a farm tractor, it is built for fieldwork, PTO-driven implements, and all-day reliability. Rear PTO capability allows use of mowers, tillers, and other PTO-driven equipment. Key specs include 180 HP, 153 HP PTO, estimated used range $36,288–$108,864, and overall suitability 62/100.
Higher = simpler
Pros
- ✓Efficient consumption relative to power-to-weight and engine type.
- ✓Simple maintenance; mechanical transmission with lower repair costs.
- ✓High versatility: PTO and hydraulic options for multiple implements.
- ✓Strong power-to-weight ratio for drawbar work and acceleration.
- ✓Reliable manual transmission with low maintenance cost.
Cons
- •May be excessive in size and fuel use for very small farms.
- •Limited capacity for intensive loader work.
- •Premium price segment relative to power and specification level.
- •Basic hydraulic system; limited for demanding implements.
John Deere 4040 receives an overall suitability score of 62/100 from the TractorSuitabilityâ„¢ Engine. mixed use with multiple PTO and hydraulic implements, operations where fuel economy is a priority. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. Loader work rates 15/100; fuel efficiency index is 100/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Low: Good fuel efficiency, strong value tier, and low maintenance complexity keep operating costs down. Versatility (71/100) reflects PTO and hydraulic options; cost tier (39/100) reflects value for money. It has relative limitations in: small farm, large farm, loader. Overall, it offers a balanced profile for its class. The TractorSuitabilityâ„¢ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.
Real-world performance & ownership
Highlights
- High horsepower supports large implements and high capacity.
- Manual transmission keeps design simple and ownership costs lower.
- Rated PTO output of 153 HP supports mowers, hay tools, and other driven implements.
- Suitability profile is solid across typical use cases.
- Fuel efficiency scores well for its power class.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $36,288–$108,864 USD.
- Farm orientation targets fieldwork, PTO work, and reliability.
Trade-offs
- Published weight is missing; confirm actual weight for transport, stability, and tire ballasting decisions.
- Suitability scoring suggests above-average maintenance demands; consider repair history and local support.
- Loader suitability scores modestly; check front axle capacity and loader compatibility for heavy material work.
Best for
- Heavy tillage and large hay
- High-capacity harvesting
- Large-acreage farming
- Fuel-conscious operation
- Mixed tasks and attachment use
Not ideal for
- Heavy, continuous loader work
- Low-maintenance-first buyers
John Deere 4040 — Pros and Cons
Pros
- High horsepower supports large implements and high capacity.
- Manual transmission keeps design simple and ownership costs lower.
- Rated PTO output of 153 HP supports mowers, hay tools, and other driven implements.
- Suitability profile is solid across typical use cases.
- Fuel efficiency scores well for its power class.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $36,288–$108,864 USD.
- Farm orientation targets fieldwork, PTO work, and reliability.
Cons
- Published weight is missing; confirm actual weight for transport, stability, and tire ballasting decisions.
- Suitability scoring suggests above-average maintenance demands; consider repair history and local support.
- Loader suitability scores modestly; check front axle capacity and loader compatibility for heavy material work.
Used market insights
Estimated used price
$36,288 – $108,864 USD
High confidence
Estimate only. Actual prices vary by condition, hours, and region.
Buyer checklist
- Check engine and PTO hours; service history matters for long-term reliability.
- Confirm PTO speed (540/1000) and HP match your mowers, balers, or other implements.
- Inspect hydraulics and three-point hitch condition; repair costs can be high.
For used John Deere 4040, hours and service history matter. Confirm PTO and hydraulic operation, tire condition, and that implements match your HP and category.
Find Used Listings (International)
Technical Specifications
What this means: Engine specs define power for PTO work, drawbar load, and fuel use. Higher displacement often means more torque at lower rpm.
Engine
- Maximum Power (Gross)
- 180 HP (134 kW)
- Fuel Type
- Diesel
- Cooling
- Liquid
Documentation & Resources
Compare with similar models
Better Alternatives
Frequently asked questions
Is the John Deere 4040 good for loader work?
TractorFit scores rate this model as less suited for loader work (15/100). Check front axle capacity and loader compatibility for your intended use.
What is the John Deere 4040 best used for?
As a farm tractor, the John Deere 4040 is suited to fieldwork, PTO-driven implements, hay work, and general estate or small-farm tasks.
What type of transmission does the John Deere 4040 have?
The John Deere 4040 uses a manual transmission.
What should I check when buying a used John Deere 4040?
Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.
What fuel does the John Deere 4040 use?
The John Deere 4040 uses diesel fuel.
What is the weight of the John Deere 4040?
Published weight is not available; confirm with the seller or manufacturer for transport and ballasting.
Where can I find used John Deere 4040 listings?
This page links to international marketplaces where you can search for used John Deere 4040 tractors; listings are provided by third parties.
How much does a used John Deere 4040 cost?
Used John Deere 4040 tractors are often listed in the range of $36,288–$108,864 USD (high confidence). Actual prices depend on hours, condition, and region.
John Deere 4040: Complete Tractor Specifications and Technical Data
Overview
The John Deere 4040 is a agricultural tractor from John designed for agricultural operations. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This agricultural tractor features a 180 HP diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the John Deere 4040, making it easy to compare with other models in the John lineup or across different brands.
Engine Specifications
The John Deere 4040 is powered by a diesel engine that delivers 180 HP for agricultural tasks. Tractor horsepower is a critical specification that determines the machine's ability to handle various implements. The engine specifications demonstrate John's engineering expertise in creating efficient powerplants.
- Maximum Power: 180 HP (134 kW)
- Fuel Type: Diesel
- Cooling System: Liquid-cooled
Transmission Specifications
The John Deere 4040 features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.
Power Take-Off (PTO)
The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.
- PTO Speed: 540 rpm
- PTO Power: 153 HP (114 kW)
Performance and Applications
The John Deere 4040 delivers 180 HP performance for agricultural applications including plowing, planting, and harvesting. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the John Deere 4040 matches your operational demands.
Technical Data Summary
This guide provides complete technical data and detailed specifications for the John Deere 4040. Key specifications include: 180 HP engine, manual transmission, 153 HP PTO. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.
Conclusion
The John Deere 4040 is a reliable agricultural tractor from John, designed for modern farming operations. With its 180 HP diesel engine and manual transmission, it provides dependable performance for agricultural tasks. This comprehensive guide offers all essential John Deere 4040 tractor data and specifications for informed decision-making.
Conclusion
With 180 HP, the John Deere 4040 is a solid choice for operators who need Heavy tillage and large hay, High-capacity harvesting, Large-acreage farming. Check the price range shown above and compare with similar models to ensure it fits your budget. Use our comparison tool to stack the 4040 against other tractors in the same HP range before making a final decision.