Back to brands
Photo Not AvailableFendt 1162 Vario MT
Industrial

Photo by Bahnfrend, CC BY-SA 4.0, via Wikimedia Commons

Fendt

Fendt 1162 Vario MT Specs, Price and Review (2026)

Industrial · 610.2 HP · Best for fuel efficiency and versatility

Power

610.2 HP (455 kW)

Fuel

Diesel

Transmission

Manual

PTO

519 HP @ 540 rpm

Weight

19,051 kg (19 t)

New price (est.)

$656,819 – $985,229

Est. used price

$229,887 – $689,660

Overview

TractorFitâ„¢ Analysis

53

Overall score

Based on specs and use-case fit for Fendt 1162 Vario MT.

With its specs, the 180+ HP segment aimed at maximum productivity and large-implement compatibility. Manual transmission is a proven choice for operators who prefer direct gear selection. Industrial and utility use typically involves loaders, backhoes, and site work. Rear PTO capability allows use of mowers, tillers, and other PTO-driven equipment. Key specs include 610.2 HP, 519 HP PTO, 19 t operating weight, estimated used range $229,887–$689,660, and overall suitability 53/100.

Small farm suitability
12/100
Large farm suitability
65/100
Loader work efficiency
31/100
Fuel efficiency
74/100
Maintenance ease
88/100

Higher = simpler

Versatility
71/100
Cost tier
37/100
Power-to-weight
26/100

Pros

  • ✓Efficient consumption relative to power-to-weight and engine type.
  • ✓Simple maintenance; mechanical transmission with lower repair costs.
  • ✓High versatility: PTO and hydraulic options for multiple implements.
  • ✓High power for heavy fieldwork and demanding equipment.
  • ✓Reliable manual transmission with low maintenance cost.

Cons

  • •May be excessive in size and fuel use for very small farms.
  • •Limited capacity for intensive loader work.
  • •Modest power-to-weight ratio; less agility in traction and on slopes.
  • •Premium price segment relative to power and specification level.

Fendt 1162 Vario MT receives an overall suitability score of 53/100 from the TractorSuitabilityâ„¢ Engine. mixed use with multiple PTO and hydraulic implements, operations where fuel economy is a priority, demanding loader and draft work on larger operations. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. Loader work rates 31/100; fuel efficiency index is 74/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Moderate: Reasonable fuel efficiency and maintenance; operating costs are in line with the power class. Versatility (71/100) reflects PTO and hydraulic options; cost tier (37/100) reflects value for money. It has relative limitations in: small farm, loader. Overall, it offers a specialized profile for its class. The TractorSuitabilityâ„¢ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.

Real-world performance & ownership

Highlights

  • High HP supports big balers, heavy tillage, and large acreage.
  • Manual transmission keeps design simple and ownership costs lower.
  • Operating weight around 19 t supports traction and ballast for heavy implements.
  • Rated PTO output of 519 HP supports mowers, hay tools, and other driven implements.
  • Fuel efficiency scores well for its power class.
  • Versatility index supports a wide range of tasks and attachments.
  • Estimated used price range: $229,887–$689,660 USD.

Trade-offs

  • Maintenance complexity is rated on the higher side; factor in service access and parts availability.
  • Loader and front attachment suitability is limited by design; best for lighter loader duties.

Best for

  • Maximum productivity fieldwork
  • Large balers and tillage
  • Big-acreage and contractor use
  • Fuel-conscious operation
  • Mixed tasks and attachment use

Not ideal for

  • Heavy, continuous loader work
  • Low-maintenance-first buyers
  • Light-duty or compact-property-only use

Fendt 1162 Vario MT — Pros and Cons

Pros

  • High HP supports big balers, heavy tillage, and large acreage.
  • Manual transmission keeps design simple and ownership costs lower.
  • Operating weight around 19 t supports traction and ballast for heavy implements.
  • Rated PTO output of 519 HP supports mowers, hay tools, and other driven implements.
  • Fuel efficiency scores well for its power class.
  • Versatility index supports a wide range of tasks and attachments.
  • Estimated used price range: $229,887–$689,660 USD.

Cons

  • Maintenance complexity is rated on the higher side; factor in service access and parts availability.
  • Loader and front attachment suitability is limited by design; best for lighter loader duties.

Used market insights

Estimated used price

$229,887 – $689,660 USD

High confidence

Estimate only. Actual prices vary by condition, hours, and region.

Buyer checklist

  • Check engine and PTO hours; service history matters for long-term reliability.
  • Confirm PTO speed (540/1000) and HP match your mowers, balers, or other implements.
  • Inspect hydraulics and three-point hitch condition; repair costs can be high.

For used Fendt 1162 Vario MT, verify hours, hydraulic condition, and loader/backhoe compatibility. Confirm weight for transport and permits.

Find Used Listings (International)

Technical Specifications

What this means: Power and cooling capacity matter for loader and backhoe work; diesel is typical for industrial tractors.

Engine

Maximum Power (Gross)
610.2 HP (455 kW)
Fuel Type
Diesel
Cooling
Liquid

Documentation & Resources

Compare with similar models

Browse by category

Better Alternatives

Frequently asked questions

  • Does the Fendt 1162 Vario MT have a PTO?

    Yes. The Fendt 1162 Vario MT has a rear PTO rated at 519 HP at 540 rpm.

  • What is the horsepower of the Fendt 1162 Vario MT?

    The Fendt 1162 Vario MT is rated at 610.2 HP (gross) (455 kW).

  • Is the Fendt 1162 Vario MT good for loader work?

    TractorFit scores rate this model as less suited for loader work (31/100). Check front axle capacity and loader compatibility for your intended use.

  • What is the Fendt 1162 Vario MT best used for?

    The Fendt 1162 Vario MT is aimed at industrial or utility use such as loaders and site work.

  • What type of transmission does the Fendt 1162 Vario MT have?

    The Fendt 1162 Vario MT uses a manual transmission.

  • What should I check when buying a used Fendt 1162 Vario MT?

    Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.

  • What fuel does the Fendt 1162 Vario MT use?

    The Fendt 1162 Vario MT uses diesel fuel.

  • What is the weight of the Fendt 1162 Vario MT?

    Operating weight is approximately 19,051 kg (19 tons).

  • Where can I find used Fendt 1162 Vario MT listings?

    This page links to international marketplaces where you can search for used Fendt 1162 Vario MT tractors; listings are provided by third parties.

Fendt 1162 Vario MT: Complete Tractor Specifications and Technical Data

Overview

The Fendt 1162 Vario MT is a industrial tractor from Fendt designed for landscaping and property maintenance. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This industrial tractor features a 610.2 HP diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the Fendt 1162 Vario MT, making it easy to compare with other models in the Fendt lineup or across different brands.

Engine Specifications

The Fendt 1162 Vario MT is powered by a diesel engine that delivers 610.2 HP for property maintenance. Tractor horsepower is a critical specification that determines the machine's ability to handle various implements. The engine specifications demonstrate Fendt's engineering expertise in creating efficient powerplants.

  • Maximum Power: 610.2 HP (455 kW)
  • Fuel Type: Diesel
  • Cooling System: Liquid-cooled

Transmission Specifications

The Fendt 1162 Vario MT features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.

Dimensions and Weight

Understanding tractor dimensions and weight is essential for storage, transport, and operational compatibility. The Fendt 1162 Vario MT's specifications help determine if the tractor fits your operational requirements.

  • Wheelbase: 2997 mm (118.0 in)
  • Weight: 19.051 kg (42.000 lbs)

Power Take-Off (PTO)

The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.

  • PTO Speed: 540 rpm
  • PTO Power: 519 HP (387 kW)

Performance and Applications

The Fendt 1162 Vario MT delivers 610.2 HP performance for landscaping and property maintenance tasks. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the Fendt 1162 Vario MT matches your operational demands.

Technical Data Summary

This guide provides complete technical data and detailed specifications for the Fendt 1162 Vario MT. Key specifications include: 610.2 HP engine, manual transmission, 519 HP PTO, and 19.051 kg weight. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.

Conclusion

The Fendt 1162 Vario MT is a versatile lawn tractor from Fendt, designed for property maintenance. With its 610.2 HP diesel engine and manual transmission, weighing 19 tons, it provides efficient operation for landscaping work. This comprehensive guide offers all essential Fendt 1162 Vario MT tractor data and specifications for informed decision-making.

Conclusion

With 610.2 HP, the Fendt 1162 Vario MT is a model worth considering carefully for operators who need Maximum productivity fieldwork, Large balers and tillage, Big-acreage and contractor use. Check the price range shown above and compare with similar models to ensure it fits your budget. Use our comparison tool to stack the 1162 Vario MT against other tractors in the same HP range before making a final decision.

Fendt 1162 Vario MT Specs, Price & Review (2026) | TractorsCompare | TractorsCompare