AGCO Allis 7600 Specs, Price and Review (2026)
Agricultural · 95.2 HP · Best for small farms and versatility
Power
95.2 HP (71 kW)
Fuel
Diesel
Transmission
Manual
PTO
81 HP @ 540 rpm
Weight
4,440 kg (4 t)
New price (est.)
$54,835 – $82,253
Est. used price
$19,192 – $57,577
Overview
TractorFitâ„¢ Analysis
Overall score
Based on specs and use-case fit for AGCO Allis 7600.
A mainstream farm segment for fieldwork, feeding, and material handling. Manual transmission keeps ownership costs down and is well understood for maintenance. Farm-oriented design prioritizes drawbar and PTO work, hydraulics, and durability. PTO specs determine compatibility with mowers, balers, and other powered attachments. Key specs include 95.2 HP, 81 HP PTO, 4 t operating weight, estimated used range $19,192–$57,577, and overall suitability 55/100.
Higher = simpler
Pros
- ✓Well suited to small and mid-size farms for power and maneuverability.
- ✓Simple maintenance; mechanical transmission with lower repair costs.
- ✓High versatility: PTO and hydraulic options for multiple implements.
- ✓Reliable manual transmission with low maintenance cost.
Cons
- •Limited capacity for intensive loader work.
- •Modest power-to-weight ratio; less agility in traction and on slopes.
- •Basic hydraulic system; limited for demanding implements.
AGCO Allis 7600 receives an overall suitability score of 55/100 from the TractorSuitability™ Engine. Ideal for small to mid-size farms (roughly 5–40 ha), light fieldwork, mowing, and properties where maneuverability matters, mixed use with multiple PTO and hydraulic implements. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. With 95.2 HP and around 4 tons weight, it fits small and mid-size farms where maneuverability and running costs matter. Loader work rates 31/100; fuel efficiency index is 68/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Moderate: Reasonable fuel efficiency and maintenance; operating costs are in line with the power class. Versatility (71/100) reflects PTO and hydraulic options; cost tier (59/100) reflects value for money. It stands out in: small farm. It has relative limitations in: large farm, loader. Overall, it offers a balanced profile for its class. The TractorSuitability™ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.
Real-world performance & ownership
Highlights
- HP band suits full-season fieldwork and feeding.
- Manual transmission keeps design simple and ownership costs lower.
- 4 t operating weight fits a broad range of implements and conditions.
- Rated PTO output of 81 HP supports mowers, hay tools, and other driven implements.
- Suitability profile is solid across typical use cases.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $19,192–$57,577 USD.
- Farm orientation targets fieldwork, PTO work, and reliability.
Trade-offs
- Suitability scoring suggests above-average maintenance demands; consider repair history and local support.
- Loader suitability scores modestly; check front axle capacity and loader compatibility for heavy material work.
Best for
- Row-crop and hay operations
- Feeding and material handling
- Full-season fieldwork
- Mixed tasks and attachment use
Not ideal for
- Heavy, continuous loader work
- Low-maintenance-first buyers
AGCO Allis 7600 — Pros and Cons
Pros
- HP band suits full-season fieldwork and feeding.
- Manual transmission keeps design simple and ownership costs lower.
- 4 t operating weight fits a broad range of implements and conditions.
- Rated PTO output of 81 HP supports mowers, hay tools, and other driven implements.
- Suitability profile is solid across typical use cases.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $19,192–$57,577 USD.
- Farm orientation targets fieldwork, PTO work, and reliability.
Cons
- Suitability scoring suggests above-average maintenance demands; consider repair history and local support.
- Loader suitability scores modestly; check front axle capacity and loader compatibility for heavy material work.
Used market insights
Estimated used price
$19,192 – $57,577 USD
High confidence
Estimate only. Actual prices vary by condition, hours, and region.
Buyer checklist
- Check engine and PTO hours; service history matters for long-term reliability.
- Confirm PTO speed (540/1000) and HP match your mowers, balers, or other implements.
- Inspect hydraulics and three-point hitch condition; repair costs can be high.
For used AGCO Allis 7600, hours and service history matter. Confirm PTO and hydraulic operation, tire condition, and that implements match your HP and category.
Find Used Listings (International)
Technical Specifications
What this means: Cylinder count and displacement affect smoothness and repair complexity; compare to similar models in the same HP band.
Engine
- Maximum Power (Gross)
- 95.2 HP (71 kW)
- Fuel Type
- Diesel
- Cooling
- Liquid
Compare with similar models
Better Alternatives
Frequently asked questions
Does the AGCO Allis 7600 have a PTO?
Yes. The AGCO Allis 7600 has a rear PTO rated at 81 HP at 540 rpm.
What is the horsepower of the AGCO Allis 7600?
The AGCO Allis 7600 is rated at 95.2 HP (gross) (71 kW).
Is the AGCO Allis 7600 good for loader work?
TractorFit scores rate this model as less suited for loader work (31/100). Check front axle capacity and loader compatibility for your intended use.
What is the AGCO Allis 7600 best used for?
As a farm tractor, the AGCO Allis 7600 is suited to fieldwork, PTO-driven implements, hay work, and general estate or small-farm tasks.
What type of transmission does the AGCO Allis 7600 have?
The AGCO Allis 7600 uses a manual transmission.
What should I check when buying a used AGCO Allis 7600?
Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.
What fuel does the AGCO Allis 7600 use?
The AGCO Allis 7600 uses diesel fuel.
What is the weight of the AGCO Allis 7600?
Operating weight is approximately 4,440 kg (4 tons).
Where can I find used AGCO Allis 7600 listings?
This page links to international marketplaces where you can search for used AGCO Allis 7600 tractors; listings are provided by third parties.
AGCO Allis 7600: Complete Tractor Specifications and Technical Data
Overview
The AGCO Allis 7600 is a agricultural tractor from AGCO designed for agricultural operations. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This agricultural tractor features a 95.2 HP diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the AGCO Allis 7600, making it easy to compare with other models in the AGCO lineup or across different brands.
Engine Specifications
The AGCO Allis 7600 is powered by a diesel engine that delivers 95.2 HP for agricultural tasks. Tractor horsepower is a critical specification that determines the machine's ability to handle various implements. The engine specifications demonstrate AGCO's engineering expertise in creating efficient powerplants.
- Maximum Power: 95.2 HP (71 kW)
- Fuel Type: Diesel
- Cooling System: Liquid-cooled
Transmission Specifications
The AGCO Allis 7600 features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.
Dimensions and Weight
Understanding tractor dimensions and weight is essential for storage, transport, and operational compatibility. The AGCO Allis 7600's specifications help determine if the tractor fits your operational requirements.
- Wheelbase: 2642 mm (104.0 in)
- Weight: 4440 kg (9789 lbs)
Power Take-Off (PTO)
The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.
- PTO Speed: 540 rpm
- PTO Power: 81 HP (60 kW)
Performance and Applications
The AGCO Allis 7600 delivers 95.2 HP performance for agricultural applications including plowing, planting, and harvesting. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the AGCO Allis 7600 matches your operational demands.
Technical Data Summary
This guide provides complete technical data and detailed specifications for the AGCO Allis 7600. Key specifications include: 95.2 HP engine, manual transmission, 81 HP PTO, and 4440 kg weight. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.
Conclusion
The AGCO Allis 7600 is a reliable agricultural tractor from AGCO, designed for modern farming operations. With its 95.2 HP diesel engine and manual transmission, weighing 4 tons, it provides dependable performance for agricultural tasks. This comprehensive guide offers all essential AGCO Allis 7600 tractor data and specifications for informed decision-making.
Conclusion
With 95.2 HP, the AGCO Allis 7600 is a solid choice for operators who need Row-crop and hay operations, Feeding and material handling, Full-season fieldwork. Check the price range shown above and compare with similar models to ensure it fits your budget. Use our comparison tool to stack the Allis 7600 against other tractors in the same HP range before making a final decision.