Hart-Parr 40-80 Specs, Price and Review (2026)
Industrial · 110 HP · Best for versatility and fuel efficiency
Power
110 HP (82 kW)
Fuel
Diesel
Transmission
Manual
PTO
94 HP @ 540 rpm
Weight
15,422 kg (15 t)
New price (est.)
$79,200 – $118,800
Est. used price
$27,720 – $83,160
Overview
Powered by a 110 HP engine, the Hart-Parr 40-80 is a industrial utility tractor designed for loader work, backhoe use, and site operations. Built by Hart-Parr, the 40-80 carries the engineering standards expected from this manufacturer. Here you will find all 40-80 specs: engine displacement, fuel system, transmission gears, hydraulic flow, lift capacity, PTO speed, and tractor dimensions. Our 40-80 review section below breaks down real-world strengths, trade-offs, and best use cases based on the technical specifications. Looking for the 40-80 price? Our used market section estimates current resale values, and the listings panel links to live marketplace data. Scroll down for the complete Hart-Parr 40-80 specification tables, suitability scores, price estimates, and links to similar tractors in our database.
TractorFitâ„¢ Analysis
Overall score
Based on specs and use-case fit for Hart-Parr 40-80.
A 60–120 HP range that fits full-time farming and large-property management. Manual transmission is a proven choice for operators who prefer direct gear selection. Industrial and utility use typically involves loaders, backhoes, and site work. Rear PTO capability allows use of mowers, tillers, and other PTO-driven equipment. Key specs include 110 HP, 94 HP PTO, 15 t operating weight, estimated used range $27,720–$83,160, and overall suitability 49/100.
Higher = simpler
Pros
- ✓Simple maintenance; mechanical transmission with lower repair costs.
- ✓High versatility: PTO and hydraulic options for multiple implements.
- ✓Reliable manual transmission with low maintenance cost.
Cons
- •May be excessive in size and fuel use for very small farms.
- •Limited capacity for intensive loader work.
- •Modest power-to-weight ratio; less agility in traction and on slopes.
- •Basic hydraulic system; limited for demanding implements.
Hart-Parr 40-80 receives an overall suitability score of 49/100 from the TractorSuitabilityâ„¢ Engine. mixed use with multiple PTO and hydraulic implements. The suitability sub-scores allow an objective comparison of performance across farm sizes and use types. Loader work rates 31/100; fuel efficiency index is 59/100. Maintenance is classified as Low: Mechanical transmission and straightforward engine design; lower repair costs and easier DIY or general dealer servicing. Operating cost tier is Moderate: Reasonable fuel efficiency and maintenance; operating costs are in line with the power class. Versatility (71/100) reflects PTO and hydraulic options; cost tier (58/100) reflects value for money. It has relative limitations in: small farm, large farm, loader. Overall, it offers a specialized profile for its class. The TractorSuitabilityâ„¢ Engine uses manufacturer technical data only to compute these indices in an objective, reproducible way. We recommend comparing these scores with your specific acreage, crop type, and implement needs before deciding.
Real-world performance & ownership
Highlights
- HP band suits full-season fieldwork and feeding.
- Manual transmission keeps design simple and ownership costs lower.
- Operating weight around 15 t supports traction and ballast for heavy implements.
- Rated PTO output of 94 HP supports mowers, hay tools, and other driven implements.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $27,720–$83,160 USD.
Trade-offs
- Suitability scoring suggests above-average maintenance demands; consider repair history and local support.
- Loader suitability scores modestly; check front axle capacity and loader compatibility for heavy material work.
Best for
- Row-crop and hay operations
- Feeding and material handling
- Full-season fieldwork
- Mixed tasks and attachment use
Not ideal for
- Heavy, continuous loader work
- Low-maintenance-first buyers
Hart-Parr 40-80 — Pros and Cons
Pros
- HP band suits full-season fieldwork and feeding.
- Manual transmission keeps design simple and ownership costs lower.
- Operating weight around 15 t supports traction and ballast for heavy implements.
- Rated PTO output of 94 HP supports mowers, hay tools, and other driven implements.
- Versatility index supports a wide range of tasks and attachments.
- Estimated used price range: $27,720–$83,160 USD.
Cons
- Suitability scoring suggests above-average maintenance demands; consider repair history and local support.
- Loader suitability scores modestly; check front axle capacity and loader compatibility for heavy material work.
Used market insights
Estimated used price
$27,720 – $83,160 USD
High confidence
Estimate only. Actual prices vary by condition, hours, and region.
Buyer checklist
- Check engine and PTO hours; service history matters for long-term reliability.
- Confirm PTO speed (540/1000) and HP match your mowers, balers, or other implements.
- Inspect hydraulics and three-point hitch condition; repair costs can be high.
For used Hart-Parr 40-80, verify hours, hydraulic condition, and loader/backhoe compatibility. Confirm weight for transport and permits.
Find Used Listings (International)
Find Hart-Parr Dealers Near You
Authorized dealerships selling and servicing Hart-Parr tractors.
Technical Specifications
What this means: Industrial use demands reliability under load; engine specs affect duty cycle and attachment compatibility.
Engine
- Maximum Power (Gross)
- 110 HP (82 kW)
- Fuel Type
- Diesel
- Cooling
- Liquid
Compare with similar models
Frequently asked questions
What is the horsepower of the Hart-Parr 40-80?
The Hart-Parr 40-80 is rated at 110 HP (gross) (82 kW).
Is the Hart-Parr 40-80 good for loader work?
TractorFit scores rate this model as less suited for loader work (31/100). Check front axle capacity and loader compatibility for your intended use.
What is the Hart-Parr 40-80 best used for?
The Hart-Parr 40-80 is aimed at industrial or utility use such as loaders and site work.
What type of transmission does the Hart-Parr 40-80 have?
The Hart-Parr 40-80 uses a manual transmission.
What should I check when buying a used Hart-Parr 40-80?
Verify hours, condition, service history, PTO operation, hydraulics, and tire wear. Confirm weight and dimensions if you need to transport or match implements.
What fuel does the Hart-Parr 40-80 use?
The Hart-Parr 40-80 uses diesel fuel.
Hart-Parr 40-80: Complete Tractor Specifications and Technical Data
Overview
The Hart-Parr 40-80 is a industrial tractor from Hart-Parr designed for landscaping and property maintenance. This comprehensive tractor specifications guide provides complete technical data, engine specifications, transmission details, dimensions, and hydraulic system capabilities. This industrial tractor features a 110 HP diesel engine with manual transmission, delivering reliable performance. Our tractor database provides detailed specifications and technical data for the Hart-Parr 40-80, making it easy to compare with other models in the Hart-Parr lineup or across different brands.
Engine Specifications
The Hart-Parr 40-80 is powered by a diesel engine that delivers 110 HP for property maintenance. Tractor horsepower is a critical specification that determines the machine's ability to handle various implements. The engine specifications demonstrate Hart-Parr's engineering expertise in creating efficient powerplants.
- Maximum Power: 110 HP (82 kW)
- Fuel Type: Diesel
- Cooling System: Liquid-cooled
Transmission Specifications
The Hart-Parr 40-80 features a manual transmission system. Transmission type affects power delivery and operational efficiency. Different transmission types offer various advantages for different operating conditions and implement requirements.
Dimensions and Weight
Understanding tractor dimensions and weight is essential for storage, transport, and operational compatibility. The Hart-Parr 40-80's specifications help determine if the tractor fits your operational requirements.
- Weight: 15.422 kg (34.000 lbs)
Power Take-Off (PTO)
The PTO system allows the tractor to transfer engine power to driven implements. PTO specifications, including horsepower and speed ratings, are essential when selecting implements.
- PTO Speed: 540 rpm
- PTO Power: 94 HP (70 kW)
Performance and Applications
The Hart-Parr 40-80 delivers 110 HP performance for landscaping and property maintenance tasks. Tractor performance metrics, including power output, hydraulic capabilities, and dimensions, determine the machine's suitability for various tasks. When evaluating tractor performance, consider your specific application requirements, operating conditions, and implement needs to ensure the Hart-Parr 40-80 matches your operational demands.
Technical Data Summary
This guide provides complete technical data and detailed specifications for the Hart-Parr 40-80. Key specifications include: 110 HP engine, manual transmission, 94 HP PTO, and 15.422 kg weight. These tractor specifications enable accurate comparisons with other models. Our tractor database provides comprehensive data for thousands of models, making it easy to research specifications and compare tractors.
Conclusion
The Hart-Parr 40-80 is a versatile lawn tractor from Hart-Parr, designed for property maintenance. With its 110 HP diesel engine and manual transmission, weighing 15 tons, it provides efficient operation for landscaping work. This comprehensive guide offers all essential Hart-Parr 40-80 tractor data and specifications for informed decision-making.
Conclusion
With 110 HP, the Hart-Parr 40-80 is a model worth considering carefully for operators who need Row-crop and hay operations, Feeding and material handling, Full-season fieldwork. Check the price range shown above and compare with similar models to ensure it fits your budget. Use our comparison tool to stack the 40-80 against other tractors in the same HP range before making a final decision.